1.仪器基本情况

仪器名称：自动研磨抛光机

设备编号：1704642S

型号：Ecomet300/Automet300

生产厂家：美国Buehler公司

2.主要规格及技术指标

2.1. 磨盘工作功率：1500W

2.2. 自动工作头功率：560W

2.3. 磨盘直径300mm。

2.4. 底盘转速：50-400转/分钟，10rpm增量，转动方向可调。

2.5. 自动工作头转速：60-150转/分钟，10rpm增量，转向可调节，以在必要时增加切削速度。

2.6. 压力模式：同时具有单点力(5-90 N和中间力(40-535 N种模式)。

2.7. 可拉出伸缩式水管，方便冲洗磨盘、夹具、样品，不留死角。

2.8. 独特的“D”型磨抛碗设计，方便磨盘更换。

2.9. 动力头设置：可转到磨盘外侧，方便异形样品手动制样。

2.10. 触摸面板控制。

2.11. 水流出口，出水大小/方向可调节。

2.12. 安全性能：紧急停车旋钮。

2.13. 所有夹具可方便且快速的与工作头装配或拆卸，以满足频繁的清洗和显微观察要求。

2.14. 气动压力控制， 稳定安全。

2.15. 面板控制：压力模式， 压力大小， 工作头转向， 工作时间， 水流开关。

2.16. 工作环境：220V/50Hz，气压85psi (6bars)，清洁自来水。

2.17. 配置30mm中心力夹具1套；30mm单点力夹具一套；UltraPrep金刚石磨盘，40um，3片；UltraPrep金刚石磨盘，20um，3片；带背胶 12IN 180[P180]、320[P400]、400[P800]、600[P1200]，砂纸100张/包，各1包；ULTRA-PAD 抛光布、TRIDENT抛光布、MICROCLOTH抛光布，10张/包，各2包；470毫升/瓶9um，3um，1um金刚石抛光液各4瓶；MasterPrep 氧化铝悬浮液1.9 L/瓶，MasterMet 2 二氧化硅悬浮液0.02um，1.9 L各3瓶。

3.功能用途

用于金属和陶瓷材料的研磨抛光处理。

4.仪器位置

国重实验设备公共平台215室。

5.仪器管理员

吴云娣，19989664682，wuyundi@hainanu.edu.cn

办公室：南海海洋资源利用国家重点实验室203室

委燕，19808992679，993798@hainanu.edu.cn

办公室：南海海洋资源利用国家重点实验室307室

6.预约测试相关信息

开放仪器预约，按机时收费。具体可预约时间、收费标准详见海南大学大型仪器共享服务平台系统。

预约地址：https://yiqi.hainanu.edu.cn/home/#/orderDetail?id=588

1. Basic Information of the Instrument

Name: Automatic Grinding and Polishing Machine

Serial Number: 1704642S

Model Number: Ecomet300/Automet300

Manufacturer: Buehler

2. Specifications and Technical Indicators

2.1. Grinding Disc Working Power: 1,500W

2.2. Automatic Working Head Power: 560W

2.3. Grinding Disc Diameter: 300mm.

2.4. Chassis Speed: 50-400rpm; 10rpm increments; adjustable rotation direction.

2.5. Automatic Working Head Speed: 60-150rpm; 10rpm increments; adjustable rotation direction to increase cutting speed when necessary.

2.6. Pressure Mode: both single-point force (5-90 N) and intermediate force (40-535 N modes).

2.7. Retractable water hose can be pulled out for easy rinsing of grinding discs, fixtures and samples.

2.8. Unique “D” type grinding and polishing bowl design makes it easy to change grinding discs.

2.9. Power Head Setting: The power head can be turned to the outside of the grinding plate to make it convenient for manual sample making of special-shaped samples.

2.10. Touch panel control.

2.11. Adjustable waterdischarge/direction.

2.12. Safety Performance: emergency stop button.

2.13. All fixtures can be easily and quickly assembled or disassembled from the working head to meet the requirements of frequent cleaning and microscopic observation.

2.14. Stable and safe pneumatic pressure control.

2.15. Panel Control: pressure mode, pressure level, working head turning, working time, water flow switch.

2.16. Working Environment: 220V/50Hz, air pressure 85psi (6bars), clean tap water.

2.17. 1 set of 30mm centering jig; 1 set of 30mm single-point force jig; UltraPrep diamond grinding disc, 40um, 3 pieces; UltraPrep diamond grinding disc, 20um, 3 pieces; backing adhesive 12IN 180 [P180], 320 [P400], 400 [P800], 600 [P1200], 100 sheets of sandpaper per pack, one pack each; ULTRA-PAD polishing cloth, TRIDENT polishing cloth, MICROCLOTH polishing cloth, 10 sheets/pack, 2 packs each; diamond polishing solution of 9um, 3um and 1um, 470ml/bottle, 4 bottles each; MasterPrep alumina suspension, 1.9 L/bottle, MasterMet 2 silicon dioxide suspension, 0.02um, 1.9 L, 3 bottles each.

3. Function and Usage

The grinding and polishing of metal and ceramic materials.

4. Place

Room 215 of Public Platform for Experimental Instruments of State Key Laboratory of Marine Resources Utilization in the South China Sea (MRU)

5. Administrators

Yundi Wu, 19989664682, wuyundi@hainanu.edu.cn

Office: Room 203, MRU

Yan Wei, 19808992679, 993798@hainanu.edu.cn

Office: Room 307, MRU

6. Reservation

Open instrument reservation, and charge by the service time. Detailed information can be seen in Hainan University Large Instrument Sharing Service Platform System.

Address: https://yiqi.hainanu.edu.cn/home/#/orderDetail?id=588